1601-0X01X DINTEK Multi-Use ezi-BOOT (5.5Ø - 7.0Ø)

Order Now
 
 
 


The DINTEK Muti-Use ezi-BOOTTM is specifically made to be used with multiple cable sizes, ranging from 5.5mm to 7.0mm.
The boot can be trimmed to suit the different cable sizes by cutting at the various size markings on the rear of the boot.
The DINTEK Muti-Use Strain Relief ezi-BOOTTM is designed specifically to be crimped with a range of RJ45 plugs. Once crimped, this design allows the strain relief boot to relax slightly, helping to prevent the cable pairs from being over compressed. The tab on top of the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cables.









Features

  • Cable jacket sizes can be used between 5.5mm to 7.0mm
  • DINTEK Colored RJ45 boots offer stain-relief and quick identifications
  • Designed to be crimped with the DINTEK RJ45 Modular Plugs
  • Finished terminations have the look of commercially molded plugs.
  • Maintains proper bend radius, especially on stranded cable.
  • Snag-proof design makes plugging/unplugging much easier.








Ordering Information
Product NumberProduct NameColorCable TypeStd. Pkg. Qty

1601-02015

Multi Use ezi-BOOT Strain Relief RJ45 Boot (5.5Ø - 7.0Ø)

Red

Cat.5e/Cat.6

1000pcs/box

1601-03012

Multi Use ezi-BOOT Strain Relief RJ45 Boot (5.5Ø - 7.0Ø)

Orange

Cat.5e/Cat.6

1000pcs/box

1601-04014

Multi Use ezi-BOOT Strain Relief RJ45 Boot (5.5Ø - 7.0Ø)

Yellow

Cat.5e/Cat.6

1000pcs/box

1601-05014

Multi Use ezi-BOOT Strain Relief RJ45 Boot (5.5Ø - 7.0Ø)

Green

Cat.5e/Cat.6

1000pcs/box

1601-06015

Multi Use ezi-BOOT Strain Relief RJ45 Boot (5.5Ø - 7.0Ø)

Blue

Cat.5e/Cat.6

1000pcs/box

1601-08018

Multi Use ezi-BOOT Strain Relief RJ45 Boot (5.5Ø - 7.0Ø)

Gray

Cat.5e/Cat.6

1000pcs/box


 

 
 
Get A Quote