1505-03001 DuraMAX Cat.5e RJ45 Industrial STP Plug
As more and more industrial devices and appliances are controlled using connection to the IT Network, a more noise-tolerant and robust-structured modular plug is required compared to a common office LAN application plug. The plugs and cables must have a strong shielded structure to handle electrical noise and they must also be designed to work in harsh environments such as extreme temperatures, humidity or vibration.
The DINTEK DuraMAX+TM Industrial Grade Cat.5E RJ45 Field Plug has been designed for easy installation and field termination while being contained in a rugged package. The plug features a fully shielded die-cast housing, and is a highly durable Cat.5E compliant component. Effortless termination has been achieved using the ezi-CONNECTTM IDC system, which allows reliable and easy termination process without the need to strip the wires.
- IP Cameras
Human Machine Interface (HMIs)
- Industrial PCs / Industrial Robots
- Remote I/Os
- Programmable Logic Controllers (PLCs)
- Cat.5E STP field termnination capability
- Industrial Strength Body Casing
- Compatible with Cat.5E component performance under (ANSI/TIA-568-2.D)
- Fully shielded metal housing guarantees secure and reliable
- A fast and reliable termination helps save labor costs
FORCE Technology-T822748, DANAK-19/18853
EC Cabling product ID : 6159
- 10BASE-T to 1GBASE-T
- IEEE 802.3af (Type 1 PoE)
- IEEE 802.3at (Type 2 PoE)
- IEEE 802.3bt (Type 3 PoE)
- IEEE 802.3bt (Type 4 PoE)
- Power over HDBaseT (POH)
|Product Number||Product Name||Category||Accepted Gauge|
DuraMAXTM Cat.5e RJ45 Industrial STP Plug (field terminated)
DuraMAXTM Cat.6 RJ45 Industrial STP Plug (field terminated)
DuraMAXTM Cat.6A RJ45 Industrial STP Plug (field terminated)
|ISO/IEC 11801-1:2017 (Ed. 1.0) / ISO/IEC 11801-2:2017 (Ed. 1.0)EN 50173-1:2011 / EN 50173-2:2007 including amendment Al:2010ANSI/TIA-568-2.DIEC 61935-2:2010 (Ed. 3.0) (transmission requirements)IEC 60512-99-002 (draft 48B/2531/CD) (plug)|
|Independent Compliance Report||FORCE Technology-T822748, DANAK-19/18853|
|Dimensions||55.3mm(W) x 15.0mm(H) x 13.8mm(D)|
|Housing||Zinc-alloy fully shielded|
|Contact Pin||Phosphor Bronze Alloy Plated With 50 micro-inch of Gold|
|Accepted IDC Wire Gauges||22~26AWG|
|Temperature Rating||Storage: -40℃ to +70℃ | Operational: -10℃ to +60℃|
|Electrical Insulation Resistance||500MΩ min. @ 100V D.C|
|Dielectric Withstanding Voltage||1000V D.C A.C Peak Contact to Contact or 1500V D.C A.C Peak Contact to Shield:@ 60Hz for 1 minute|
Step 1: Put cable through the Nut. (OD:6-8mm;22-26AWG)
Step 2: Strip off cable jacket for at least 1.2 Inches and retain a 0.2 Inches foil from cable end.
Step 3: Put wires through wiring management in accordance with wiring color code.
Step 4: Press wiring management to terminate wires.
Step 5: Trim excess wires.
Step 6: Assemble the wiring management ("UP" on the top surface) into the groove of base housing, and locate the nut in the indicated slot.
Step 7: 1.Put cover into revolving groove, then press the cover to engage with base housing.
Step 8: Lock and tighten the nut.
Unlock the nut. Insert the slotted screwdriver into the slot and rotate to open the jaws. Insert the slotted screwdriver into the slot and rotate to open the wiring Management.