1305-03024 PowerPRO Cat.5e 110 Vertical Shielded Jack

Order Now
 
 
 


The DINTEK PowerPROTM 8-position modular jack offers enhanced performance at component, link and channel levels. The jacks also offer increased flexibility with universal termination using either T568A or T568B wiring patterns.

The PowerPROTM Enhanced CAT5 jacks have been manufactured with the ability to fit most major face plate brands with or without module clips.

Regardless of your application requirements, the DINTEK PowerPROTM keystones in combination with other DINTEK CAT.5E components, will give an assurance to the end user, along with the aid of the 25year warranty offered by DINTEK Electronic to it’s registered installers.

DINTEK PowerPROTM .... Systems you can rely on.


Applications

  • Voice; T1; ISDN
  • 10BASE-T (IEEE 802.3)
  • 16Mbps Token Ring (IEEE802.5) 
  • 100VG-AnyLAN (IEEE802.12)
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps 1.2/2.4 Gbps ATM
  • 1000Mbps Gigabit Ethernet
  • 550MHz Broadband Video





Standards

  • UL, ETL Verifi ed
  • ANSI/TIA-568-C.2
  • ISO/IEC 11801
  • EN 50173

Features

  • Meet all category 5e channel performance requirements specified in ANSI/TIA-568-2.D
  • 110 type IDC termination
  • Accept 22~26AWG, stranded or solid wire
  • Modular jack meet FCC part 68
  • Wiring: T568A/B





Ordering Information
Product NumberProduct NameOrientation

Color

Std Pkg Qty

1305-03024

PowerPRO Cat.5e 110/Krone Vertical Shielded Jack

Vertical

Shielded

1pcs / PE bag


Technical Specifications
Construction
Body
Connector HousingHigh Impact Flame-Retardant Plastic
StandardUL94v-0 rated
Front Connection
Contact TypeSpring Wire
MaterialPhosphor Bronze Alloy Plated with 50 micro-inch of Gold over 70~100 micro-inch of Nickel

Contact Plating

24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel

Body Housing

Zinc-alloy fully shielded

Rear Terminals
Terminal TypeIDC
MaterialPhosphor Bronze Alloy with 10 micro-inch 100% Sn Alloy
Physical Ranges
Temperature Range
Stroage-40 to +70℃
Operational-10 to +60℃
Relative humidity
OperationalMax. non-condensing 93%
Retention50N (11 Ibf) for 60s ± 5s
Insertion/Extraction life750 cycles minimum
Number of IDC terminations200 minimum

Total mating force

800 grams for a 8 wire leads minimum

Electrical
Insulation Resistance500 mΩ min.@ 100V d.c
Dielectric Withstanding Voltage1000 V d.c. or a.c. Peak Contact to Contact @ 60 Hz for 1 MIN.
Spring Wire Contact Resistance20 mΩ Max.
Voltage/Current Rating150VAC/1.5A
IDC Contact Resistance2.5 mΩ Max.

DC Resistance

Max. 0.1Ω


 

 
 
Get A Quote