PowerMAX - 2mtr Patch Cords

  • 1201-04X42 PowerMAX 2mtr Cat.6 U/UTP Patch Cord - LSZH

    DINTEK PowerMAXTM Category 6 LSZH Patch Cords are specifically designed to support high speed data networks for Gigabit applications, and are fully tested to meet ANSI/TIA Category 6 channel requirements. The patch cables are made from high quality shielded four pair 24AWG stranded wire.  DINTEK PowerMAXTM Cat.6 LSZH Patch Cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAXTM UTP products be used in a end-to-end system to maximize cabling performance.ApplicationsPatch panel to patch panel connectionsPC to information outlet connectionsInformation outlet to telecommunications closet connectionsEquipment & DTE connectionsVoice; T1; ISDN10BASE-T (IEEE 802.3)16Mbps Token Ring (IEEE802.5) 100VG-AnyLAN (IEEE802.12)100BASE-T Ethernet (IEEE802.3)155/622Mbps 1.2/2.4 Gbps ATM1000Mbps Gigabit Ethernet550MHz Broadband VideoFeaturesMolded boots prevent pin from bending and cables from kinking24AWG stranded wire provides maximum flexibilityBrilliant colors make management a snapFully tested to meet ANSI/TIA-568-2.D category 6 requirementThe various colors are available to meet TIA/EIA-606 standardsThe mechanical characteristics and transmission performance meet 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements.Standards ConformanceETL verified to ANSI/TIA-568-2.D specificationsISO/IEC11801 2nd editionANSI/TIA-568-C.2CENELEC EN 50173LSZH Flame test as per IEC 60332-1RoHS-6 CompliantOrdering InformationProduct NumberProduct NameJacket TypeColorLength Qty1201-04478Cat.6 U/UTP Patch CordLSZH Gray 2 m 1201-04479Cat.6 U/UTP Patch CordLSZH Blue 2 m 1201-04480Cat.6 U/UTP Patch CordLSZH Red 2 m 1201-04481Cat.6 U/UTP Patch CordLSZH Yellow 2 m 1201-04482Cat.6 U/UTP Patch CordLSZH Green 2 m Technical Specifications
  • 1201-04XX2 PowerMAX 2mtr Cat.6 U/UTP Patch Cord - PVC

    DINTEK PowerMAXTM Category 6 Patch Cords are specifically designed to support high speed data networks for Gigabit applications, and are fully tested to meet TIA/EIA Category 6 channel requirements. The patch cables are made from high quality shielded four pair 24AWG stranded wire.  DINTEK PowerMAXTM Cat.6 Patch Cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAXTM UTP products be used in a end-to-end system to maximize cabling performance.ApplicationsPatch panel to patch panel connectionsPC to information outlet connectionsInformation outlet to telecommunications closet connectionsEquipment & DTE connectionsVoice; T1; ISDN10BASE-T (IEEE 802.3)16Mbps Token Ring (IEEE802.5) 100VG-AnyLAN (IEEE802.12)100BASE-T Ethernet (IEEE802.3)155/622Mbps 1.2/2.4 Gbps ATM1000Mbps Gigabit Ethernet550MHz Broadband VideoFeaturesMolded boots prevent pin from bending and cables from kinking24AWG stranded wire provides maximum flexibilityBrilliant colors make management a snapFully tested to meet ANSI/TIA-568-2.D category 6 requirementThe various colors are available to meet TIA/EIA-606 standardsThe mechanical characteristics and transmission performance meet 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements.Standards ConformanceETL verified to ANSI/TIA-568-2.D specificationsISO/IEC11801 2nd editionANSI/TIA-568-C.2CENELEC EN 50173Ordering InformationProduct NumberProduct NameJacket TypeColorLength Qty1201-04212Cat.6 U/UTP Patch CordPVC Gray 2 m 1201-04213Cat.6 U/UTP Patch CordPVC Blue 2 m 1201-04214Cat.6 U/UTP Patch CordPVC Yellow 2 m 1201-04215Cat.6 U/UTP Patch CordPVC Red 2 m 1201-04216Cat.6 U/UTP Patch CordPVC Green 2 m 1201-04217Cat.6 U/UTP Patch CordPVC Orange 2 m 1201-04331Cat.6 U/UTP Patch CordPVC Black 2 m 1201-04648Cat.6 U/UTP Patch CordPVC Violet 2 m Technical Specifications