1402-03020 PowerPRO 2U 48P Cat.5e UTP Patch Panel


DINTEK PowerPROTM Enhanced Category 5  UTP Patch Panels are designed for high performance, durability and ease of installation.
Available in 24 and 48 port configurations, these panels come in both channel- and component-level performance options. All panels are fully tested and comply with the latest published TIA and ISO guidelines.

DINTEK PowerPRO™ Patch Panel products offer enhanced performance for video applications attributed to its return loss and next performance. The patch panels allow users total flexibility between host and user devices within the cabling network and can support many different known or currently existing protocols by use of suitable baluns or adaptors.

Together, as part of the 25 Year Certified Cabling Solution, DINTEK’s Enhanced Cat 5 patch panels provide you with performance and reliability you can rely on.


  • Meet all category 5e connecting hardware performance requirements specified in TIA/EIA-568-B.2
  • 110 type and Krone type IDC termination
  • 19” 24 port patch panel, 1U size. & 48 port panel, 2U size
  • Accept 22~26AWG, stranded or solid wire
  • Optional rear cable management

Standards Conformance

  • UL, ETL Verified
  • ANSI/TIA-568-2.D
  • ISO / IEC 11801
  • EN 50173


  • Voice
  • ISDN
  • 10Base T(IEEE 802.3)
  • Fast Ethernet(IEEE802.3)
  • 100Vg-AnyLAN(IEEE 802.12)
  • Token Ring(IEEE 802.5)
  • TP-PMD(ANSI X3T9.5)
  • 100Base-T Ethernet(IEEE 802.3u)
  • 155/622 Mbps ATM
  • 1000Base-T
  • 550 MHz Broadband video

Ordering Information
Product NumberProduct NamePacking


1U 24 Port Cat.5e UTP Patch Panel, Component level

1pcs/box - 25boxes / Carton


2U 48 Port Cat.5e UTP Patch Panel, Component level

1pcs/box - 10boxes / Carton

19” Rear cable management ( compatible with 1402-03019 & 1402-03020 Patch Panel)

1pcs/box - 45boxes / Carton

Technical Specifications


Cold Rolled Steel


Plate: SPCC-SD 16G

Contact TypeSpring Wire
MaterialPhosphor Bronze Alloy Plated with 50 micro-inch of Gold over 70~100 micro-inch of Nickel
Rear Terminals
Terminal TypeIDC
MaterialPPhosphor Bronze Alloy with 100 micro-inch 100% Sn Alloy
Physical Ranges
Temperature Range
Storage-40 to +70℃
Operational-10 to +60℃
Relative humidity
OperationalMax. non-condensing 93%
Retention50N (11 Ibf) for 60s ± 5s
Insertion/Extraction life750 cycles minimum
Number of IDC terminations200 minimum
Insulation Resistance between conductors500 mΩ min.@ 100V d.c
Dielectric Withstanding Voltage1000 V d.c. or a.c. Peak Contact to Contact @ 60 Hz for 1 MIN.
Spring Wire Contact Resistance20 mΩ Max.
Voltage//Current Rating150VAC/1.5A
IDC Contact Resistance2.5 mΩ Max.
Compatible Product


Related Products

  Get A Quote