1305-030XX PowerPRO Cat.5e ezi-JACK Horizontal Jack

If its terminating speed that you're after, then look no further than the DINTEK PowerPRO ezi-JACK. These Jacks provide performance that exceeds category 5E connecting hardware performance specifications.
The DINTEK ezi-TOOL system is an all-in-one punch down and wire trim process, design to assure consistent connections, better performance and faster fit off times.
The PowerPROTM 90 degree ezi-JACK works with either the
​ezi-TOOL or a standard 110 style DINTEK punch down tool.
Applications
- Voice; T1; ISDN
- 10BASE-T (IEEE 802.3)
- 16Mbps Token Ring (IEEE802.5)
- 100VG-AnyLAN (IEEE802.12)
- 100BASE-T Ethernet (IEEE802.3)
- 155/622Mbps 1.2/2.4 Gbps ATM
- 1000Mbps Gigabit Ethernet
- 550MHz Broadband Video


Standards
- UL, ETL Verified
- ANSI/TIA-568-C.2
- ISO/IEC 11801
- EN 50173
Features
- Meet all category 5e channel performance requirements specified in ANSI/TIA-568-C.2
- 110 type IDC termination
- Accept 22~26AWG, stranded or solid wire
- Modular jack meet FCC part 68
- Wiring: T568A/B
Ordering Information | ||||
---|---|---|---|---|
Product Number | Product Name | Orientation | Color | Std pkg Qty |
1305-03030 | Cat.5e 90 degree unshielded E-Jack,T568A/B | Horizontal | White | 1pcs/ PE Bag |
1305-03039 | Cat.5e 90 degree unshielded E-Jack,T568A/B | Horizontal | Blue | 1pcs/ PE Bag |
1305-03040 | Cat.5e 90 degree unshielded E-Jack,T568A/B | Horizontal | Red | 1pcs/ PE Bag |
1305-03041 | Cat.5e 90 degree unshielded E-Jack,T568A/B | Horizontal | Yellow | 1pcs/ PE Bag |
1305-03042 | Cat.5e 90 degree unshielded E-Jack,T568A/B | Horizontal | Green | 1pcs/ PE Bag |
Construction | |
---|---|
Body | |
Connector Housing | High-impact, Flame Retardant Plastic |
Standard | UL94V-0 rated |
Front Connection | |
Contact Type | Spring Wire |
Material | Phosphor bronze alloy |
Contact Plating | 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel |
Rear Terminals | |
Terminal Type | IDC |
Material | Phosphor Bronze Alloy with 100 micro-inch 100% Sn Alloy |
Physical Ranges | |
Storage | -40 to +70°C |
Operational | -10 to +60°C |
Operational | Max. non-condensing 93% |
Retention | 50N (11 Ibs) for 60s ± 5s |
Insertion/Extraction Life | 750 cycles minimum |
No. Of IDC Terminations | 200 minimum |
Total mating force | 800 grams for a 8 wire leads minimum |
Electrical | |
Insulation Resistance | 500 mΩ min.@ 100V d.c |
Dielectric Withstanding Voltage | 1000 V d.c. or a.c. Peak Contact to Contact @ 60 Hz for 1 MIN. |
Spring Wire Contact Resistance | 20 mΩ Max. |
Voltage/Current Rating | 150VAC/1.5A at 20°C |
IDC Contact Resistance | 2.5 mΩ Max |