1305-03053 PowerPRO Cat.5e ezi-JACK Vertical Shielded Jack

The DINTEK PowerPROTM 8-position modular jack offers enhanced performance at component, link and channel levels. The jacks also offer increased flexibility with universal termination using either T568A or T568B wiring patterns.
The PowerPROTM Enhanced CAT5 jacks have been manufactured with the ability to fit most major face plate brands with or without module clips.
Regardless of your application requirements, the DINTEK PowerPROTM keystones in combination with other DINTEK CAT.5E components, will give an assurance to the end user, along with the aid of the 25year warranty offered by DINTEK Electronic to it’s registered installers.
DINTEK PowerPROTM .... Systems you can rely on.
Applications
- Voice; T1; ISDN
- 10BASE-T (IEEE 802.3)
- 16Mbps Token Ring (IEEE802.5)
- 100VG-AnyLAN (IEEE802.12)
- 100BASE-T Ethernet (IEEE802.3)
- 155/622Mbps 1.2/2.4 Gbps ATM
- 1000Mbps Gigabit Ethernet
- 550MHz Broadband Video


Standards
- UL, ETL Verifi ed
- ANSI/TIA-568-C.2
- ISO/IEC 11801
- EN 50173
Features
- Terminate using DINTEK'S ezi-TOOLTM
- Meet all category 5e channel performance requirements specified in ANSI/TIA-568-2.D
- 110 type IDC termination
- Accept 22~26AWG, stranded or solid wire
- Modular jack meet FCC part 68
- Wiring: T568A/B
Ordering Information | ||||
---|---|---|---|---|
Product Number | Product Name | Orientation | Color | Std Pkg Qty |
1305-03053 | Cat.5e ezi-JACK vertical keystone jack, fully shielded, T568A/B | Vertical | Shielded | 1pcs / PE bag |
Construction | |
---|---|
Body | |
Connector Housing | High Impact Flame-Retardant Plastic |
Standard | UL94v-0 rated |
Front Connection | |
Contact Type | Spring Wire |
Material | Phosphor Bronze Alloy Plated with 50 micro-inch of Gold over 70~100 micro-inch of Nickel |
Contact Plating | 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel |
Body Housing | Zinc-alloy fully shielded |
Rear Terminals | |
Terminal Type | IDC |
Material | Phosphor Bronze Alloy with 10 micro-inch 100% Sn Alloy |
Physical Ranges | |
Temperature Range | |
Stroage | -40 to +70℃ |
Operational | -10 to +60℃ |
Relative humidity | |
Operational | Max. non-condensing 93% |
Retention | 50N (11 Ibf) for 60s ± 5s |
Insertion/Extraction life | 750 cycles minimum |
Number of IDC terminations | 200 minimum |
Total mating force | 800 grams for a 8 wire leads minimum |
Electrical | |
Insulation Resistance | 500 mΩ min.@ 100V d.c |
Dielectric Withstanding Voltage | 1000 V d.c. or a.c. Peak Contact to Contact @ 60 Hz for 1 MIN. |
Spring Wire Contact Resistance | 20 mΩ Max. |
Voltage/Current Rating | 150VAC/1.5A |
IDC Contact Resistance | 2.5 mΩ Max. |
DC Resistance | Max. 0.1Ω |