1305-03048 PowerPRO Cat.5e Shuttered Vertical ezi-JACK

 


If its terminating speed that you're after, then look no further than the DINTEK PowerPRO ezi-JACK. These Jacks provide performance that exceeds category 5E connecting hardware performance specifications.

The DINTEK ezi-TOOL  system is an all-in-one punch down and wire trim process, design to assure consistent connections, better performance and faster fit off times. 

The PowerPROTM 90 degree shuttered ezi-JACK works with either the  ezi-TOOL or a standard 110 style DINTEK punch down tool.


Applications

  • Voice; T1; ISDN
  • 10BASE-T (IEEE 802.3)
  • 16Mbps Token Ring (IEEE802.5) 
  • 100VG-AnyLAN (IEEE802.12)
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps 1.2/2.4 Gbps ATM
  • 1000Mbps Gigabit Ethernet
  • 550MHz Broadband Video





Standards

  • UL, ETL Verifi ed
  • ANSI/TIA-568-C.2
  • ISO/IEC 11801
  • EN 50173

Features

  • Meet all category 5e channel performance requirements specified in ANSI/TIA-568-2.D
  • 110 type IDC termination
  • Accept 22~26AWG, stranded or solid wire
  • Modular jack meet FCC part 68
  • Wiring: T568A/B





Ordering Information
Product NumberProduct NameOrientation

Color

Std Pkg Qty

1305-03048

Cat.5e 180 degree unshielded Shuttered F-Jack,T568A/B

Vertical

White

1pcs/PE bag


Technical Specifications
Construction
Body
Connector HousingHigh Impact Flame-Retardant Plastic
StandardUL94v-0 rated
Front Connection
Contact TypeSpring Wire
MaterialPhosphor Bronze Alloy Plated with 50 micro-inch of Gold over 70~100 micro-inch of Nickel

Contact Plating

24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel

Rear Terminals
Terminal TypeIDC
MaterialPhosphor Bronze Alloy with 10 micro-inch 100% Sn Alloy
Physical Ranges
Temperature Range
Stroage-40 to +70℃
Operational-10 to +60℃
Relative humidity
OperationalMax. non-condensing 93%
Retention50N (11 Ibf) for 60s ± 5s
Insertion/Extraction life750 cycles minimum
Number of IDC terminations200 minimum

Total mating force

800 grams for a 8 wire leads minimum

Electrical
Insulation Resistance500 mΩ min.@ 100V d.c
Dielectric Withstanding Voltage1000 V d.c. or a.c. Peak Contact to Contact @ 60 Hz for 1 MIN.
Spring Wire Contact Resistance20 mΩ Max.
Voltage/Current Rating150VAC/1.5A
IDC Contact Resistance2.5 mΩ Max.

Termination Demonstration

 

Related Products

 
  Get A Quote